Under Sink Water Filter Carbonit VARIO-HP Basic, free Shipping, 229,00 €

VARIO-HP Basic

Water filtration in accordance with individual needs.
The set includes a VARIO-HP filter housing with practical quick couplings, the mating hoses and fittings.
The filtration system can be connected easily to the water supply in any standard kitchen and is hidden elegantly under the counter.
Cartridge replacement is comfortable and easy with the quick couplings.
Set is suitable for the filtration of the entire cold water flow at the sink tap, aswell as for the water withdrawal via a separate discharge.

The basic set is delivered without filter cartridge.
Compatible to all 9 3/4" filter cartridges.
For the filtration of the entire water flow at the withdrawal point, we suggest to select cartridges with a minimum flow rate of 7 l/min.
For the use of cartridges with reduced flow rate, we suggest water withdrawal via a separate sink tap or three-way sink tap.
For hygienic reasons, we recommend replacement of the cartridges every 6 months (according to DIN 1988).
Do not miss any cartridge replacement, apply for our non-binding and free of charge filter subscription service.

The filter unit can be installed at any standard water connection in the kitchen or in the bathroom.
The unit can be mounted to the wall or simply positioned without attaching.
The filtration system can be connected to a standard two-way sink tap, a separate sink tap, as well as a three-way sink tap.
The system is delivered with an angle T-valve (3/8") and a 90° angle with compression connection (10 mm).
Hoses and 3/8-inch fittings are enclosed in the set. As required, these can be extended.
Only to be used with cold water and must be protected against freezing.

This Carbonit VARIO-HP Basic contains the following parts

one Carbonit VARIO-HP basic module with device key
one Carbonit VARIO-HP wall mount plastic inlcuding screws to mount it on the device head
one Carbonit VARIO connection kit coupling DN 7,2
one inlet hose kit containing:
- one flexible hose (approx. 80 cm long with straight connections)
- with an angle valve tee (3/8") on one side
- and a ball valve with nipple (DN 7,2) on the other side
one outlet hose kit containing:
- one flexible hose (approx. 80 cm long with straight connections)
- with a quick coupling (DN 7,2) on one side
- and one 90° compression fitting (10 mm) on the other side

Width:	20 cm
Height:	34 cm
Depth:	15 cm
Length of the filter cartridge:	248 mm (9 3/4")
Flow rate (l/min at 4 bar):	22
Material:	Grilamid TR 90 POM (Hostaform C 2571)
Length of the hoses:	80 cm
Connection:	3/8" union nut Coupling DN 7.2