Carbonit SANUNO Inox F
Description
Carbonit SANUNO Inox F stainless steel countertop water filter
- SANUNO Inox F in variant with stand.
- The SANUNO Inox Set provides simple and high-class drinking water enjoyment.
- The outstanding filtration results have been proven by many scientific assessments.
- The elegant SANUNO countertop filter is installed within seconds and eliminates cumbersome drilling.
- First choice for quality sensitive people: Housing and tap exit made from high-grade and massive stainless steel. Manufactured entirely in Germany by Carbonit.
- Compatible to nearly all commercial sink taps with M22 female thread. (Adaptor enclosed for M24 female thread.)
- Perfectly suitable for the office, rented- or vacation home, or anytime when it is not appropriate to connect a filter to the water piping under the counter. This allows flexibly switching between different water taps.
- The handy switch valve allows routing of the drinking water through the filter when needed. The existing water-tap can otherwise be used as usual.
- Highest comfort: The exit, being located at the top of the unit, allows feeding to larger recipients. This design reduces undesired dripping compared to the other SANUNO models.
- The discharge (M22 male thread) is equipped as a standard with a perlator.
- Optimal for using with a whirler: Stands stable and leaves lots of space to the worktop.
Compatible filter cartridges
- The Carbonit SANUNO Inox F will be delivered with a NFP Premium-9 filter cartridge:
- pure activated carbon filter cartridge
- filter mesh: 0.45 µm; flow rate: 2.5 l/min (at 4 bar)
- very high retention rates for heavy metals, pesticides, drug contaminations and chlorine
- provides the highest protection against bacteria (see assessments)
- Compatible to all 9 3/4" filter cartridges.
- For hygienic reasons, we recommend replacement of the cartridges every 6 months (according to DIN 1988).
- Do not miss any cartridge replacement, apply for our non-binding and free of charge filter subscription service.
Installation
- The Carbonit SANUNO Inox F counter top filter can be attached easily and fast to any standard water taps.
- Connection to a sink tap via a special switch valve.
- The set contains an adapter (M24 male thread) to be used as needed (further connection adapters).
- The unit is meant to be located near the water tap, e.g on the sink.
- Only to be used with cold water and must be protected against freezing.
- Must not be installed with a low pressure water boiler.
Videos
Product videos
Scope of delivery
Scope of delivery
This Carbonit SANUNO Inox F set contains the following parts
- one SANUNO stainless steel filter housing with stand
- one inlet hose kit consisting of:
- one grey silicone hose (about 75 cm long) with
- one straight connection with bend protection (premounted on the device) on one side
- and one special switch valve (M22 union nut) on the other side
- one tap made of stainless steel with a M22 male thread and perlator
- one connection adapter M24 male thread x M22 male thread
- one Carbonit NFP Premium-9 filter cartridge
Characteristics
Characteristics
Type of connection: | On the counter |
Width: | 95 mm |
Height: | 420 mm |
Depth: | 180 mm |
Length of the filter cartridge: | 248 mm (9 3/4") |
Filter mesh (µm): | 0.45 |
Adsorptive retention rate (Polar pesticides, medical residues, bacteria, ...): | >99% |
Flow rate (l/min at 4 bar): | 2.5 |
Adsorptive retention rate (Lead, Copper): | >90% |
Adsorptive retention capacity: | 10 m³ |
Adsorptive retention rate (Chlorine): | >99% |
Particle retention capacity: | 10 m³ |
Max. useful life of the filter cartridge: | 6 months |
Blocks bacteria: | Yes |
Contains: | Activated carbon |
Connection: | M22 union nut M24 male thread |
Outlet: | Separate |
Height of the outlet: | 320 mm |
Material: | Stainless steel (V2A) |
Ratings (1)
Average product review
Total entries:
1
Total entries:
1