Carbonit NFP 4,5-20 (Medium-20)
Description
Basics
- The long version of the NFP 4,5-9 (Medium-9)
- Twice the flow rate and retention capacity compared to the short variant.
- The high maximum flow rate allows a comfortable filtering of the entire cold water flow at the discharge point.
- The existing water tap may be left unchanged. No special- or additional tap required!
- Ideal for the gastronomy, medical practices, offices or where space is not limiting.
- Good retention rates for heavy metals (e.g. lead and copper), pesticides and medical residues.
- High retention rate for chlorine. (See characteristics)
- Vitally important minerals, like magnesium and calcium, are not removed from the water.
- The filter cartridge consists of an activated carbon mono-bloc (Monoblock®) material based on coconut shell.
- Filter mesh: 1.5 µm; flow rate: 11.8 l/min (at 4 bar).
- Filter capacity: ca. 28,000 litres of water.
Compatible water filters
The cartridge fits into the following filter unit:
Operation notes
- For hygienic reasons, we recommend replacement of the cartridges every 6 months (according to DIN 1988).
- Do not miss any cartridge replacement, apply for our non-binding and free of charge filter subscription service.
- Only to be used with cold water and must be protected against freezing.
Scope of delivery
- One Carbonit NFP 4,5-20 (Medium-20) filter cartridge including gaskets.
Characteristics
Characteristics
Diameter: | 70 mm |
Length of the filter cartridge: | 508 mm (20") |
Filter mesh (µm): | 1.5 |
Adsorptive retention rate (Polar pesticides, medical residues, bacteria, ...): | 78% |
Flow rate (l/min at 4 bar): | 11.8 |
Adsorptive retention rate (Lead, Copper): | 70% |
Adsorptive retention capacity: | 26 m³ |
Adsorptive retention rate (Chlorine): | 87% |
Particle retention capacity: | 30 m³ |
Max. useful life of the filter cartridge: | 6 months |
Contains: | Activated carbon |